การติดตั้ง GPS Tracker โดยใช้ ฟิวส์แท๊ปด้วยตัวเองโดยไม่ต้องตัดต่อสายไฟ

Installation using GPS Tracker Fuse Tab.

The power supply to the GPS Tracker The real power comes from the fuse box.

The vehicle will have a fuse box already.

This is the fuse box.

Tapping the fuse box Fuse will use this tab.

In the light out of use.

We do not need to cut any wires.

First, you must first know how to tap the fuse out of use.

An example of this would fuse the tab.

Light the fuse of the car There is a fuse to light here.

This will have all the power.

Another line will tap the fuse of the cigarette.

The power fuse cigarette There are now starting The location of the cigarette lighter fuse is 15A fuse on this.

Light the fuse car There is also a fuse This procedure will measure light to see my friends.

The Fire will tab to pay for the GPS Tracker.

I will light the fuse of the tab.

The power forever And the fuse of the cigarette lighter Now we have the power to start the car.

Now, I've already prepared Meter.

Ground clamp and cable to the chassis.

This line is the yellow line Light the fuse, the fuse is here.

If we are light at this point.

Will supply all Observe the needle of the meter.

Now, it has yet to turn the car keys.

The fuse is a fuse of the cigarette.

There is a 15A fuse itself.

If we measure the power meter will not rise.

But if we turn the car keys It will have the power through the fuse immediately.

We can use this tab to access the ACC has.

Now we come to the GPS Tracker well.

This procedure is to use the Tab fuse well.

That is, we will light the fuse tab from the car.

The fuse of the cigarette lighter How to Start a Home We need to remove the fuse before we แti removed.

This tab will fuse the cigarette lighter before.

There is a 15 A fuse is built.

Pull me out here Now we have the fuse out.

The fuse of this We will take it to fuse with the tab.

We just put out the fuse when lodging in the rest of this.

it's done Then replace the plug removed.

Ready to line 1 The fuse another The fuse is lit ceiling It is also a fuse How to do it Is the fuse out of the fuse insert tab.

And then a fuse tab at the fuse box.

OK, now I have to light the fuse of the tab already.

This tab cable from the cigarette lighter fuse.

The line fuse tab from the ceiling of the car.

The light car will have all the power.

The grounding line I will continue with the bolt head on this.

GPS Tracker This is to be used for the car.

GPS Tracker assumed to be hiding here.

Power lines are drawn From this point to the The line we tab out of the socket.

OK, now harness it.

The fire is the GPS unit to the power that our tab came out.

ACC wire from the cigarette lighter fuse.

Calls on the Orange Line Red line to the fuse of light.

The black line on the ground.

Here are connected to the bolt head it.

A successfully completed on-line.

it's done Now GPS Tracker running.

A hidden GPS Tracker Closed successfully Next, try the position of the vehicle.

Application open it up Enter the User name and Password Login tap into it I used to look at our position.

If the vehicle is Gray Show that there is power in it.

Tap to see the car Cars parked here Viewing locations that match? In this position is correct.

The car is gray, we can not start the car and that there will be a Show Engine shutoff.

I am starting to see Now with the power cord into the orange line then.

To see that the car is blue.

Show that the car then starts Engine start and show If you drive off The car moves along the road.

Source: Youtube